Mimicking kidney flow shear efficiently induces aggregation of LECT2, a protein involved in renal amyloidosis.

Aggregation of leukocyte cell-derived chemotaxin 2 (LECT2) causes ALECT2, a systemic amyloidosis that affects the kidney and liver. Previous studies established that LECT2 fibrillogenesis is accelerated by the loss of its bound zinc ion and stirring/shaking. These forms of agitation create heterogeneous shear conditions, including air-liquid interfaces that denature proteins, that are not present in the body. Here, we determined the extent to which a more physiological form of mechanical stress-shear generated by fluid flow through a network of narrow channels-drives LECT2 fibrillogenesis. To mimic blood flow through the kidney, where LECT2 and other proteins form amyloid deposits, we developed a microfluidic device consisting of progressively branched channels narrowing from 5 mm to 20 µm in width. Shear was particularly pronounced at the branch points and in the smallest capillaries. Aggregation was induced within 24 h by shear levels that were in the physiological range and well below those required to unfold globular proteins such as LECT2. EM images suggested the resulting fibril ultrastructures were different when generated by laminar flow shear versus shaking/stirring. Importantly, results from the microfluidic device showed the first evidence that the I40V mutation accelerated fibril formation and increased both the size and the density of the aggregates. These findings suggest that kidney-like flow shear, in combination with zinc loss, acts in combination with the I40V mutation to trigger LECT2 amyloidogenesis. These microfluidic devices may be of general use for uncovering mechanisms by which blood flow induces misfolding and amyloidosis of circulating proteins.

The 2023 Orthopedic Research Society's international consensus meeting on musculoskeletal infection: Summary from the in vitro section.

Antimicrobial strategies for musculoskeletal infections are typically first developed with in vitro models. The In Vitro Section of the 2023 Orthopedic Research Society Musculoskeletal Infection international consensus meeting (ICM) probed our state of knowledge of in vitro systems with respect to bacteria and biofilm phenotype, standards, in vitro activity, and the ability to predict in vivo efficacy. A subset of ICM delegates performed systematic reviews on 15 questions and made recommendations and assessment of the level of evidence that were then voted on by 72 ICM delegates. Here, we report recommendations and rationale from the reviews and the results of the internet vote. Only two questions received a ≥90% consensus vote, emphasizing the disparate approaches and lack of established consensus for in vitro modeling and interpretation of results. Comments on knowledge gaps and the need for further research on these critical MSKI questions are included.

Effects of Synthetic Tetronamides and Methylated Denigrins on Bacterial Quorum Sensing and Biofilm Formation.

Detrimental biofilms of bacterial pathogens cause chronic infections with a high-level tolerance to antibiotics. To identify new control agents, we synthesized and tested a total of 14 tetronamides (including 5 new compounds) and 6 denigrin intermediates on the model species Escherichia coli. At a concentration of 50 µg/mL, two tetronamides and two methylated denigrins exhibited significant inhibitory effects against biofilm formation of E. coli RP437, e.g., by 60 and 94%, respectively. Structural analysis of the tested compounds revealed that p-methoxybenzylidene and p-methoxyphenethyl moieties of denigrins are important for biofilm inhibition, while the former group is also essential to the activity against quorum sensing (QS) via AI-2. Specifically, tetramethyldenigrin B has strong inhibitory effects against both E. coli biofilm formation and AI-2-mediated QS and thus provides a promising lead structure for designing better control agents. Consistently, tetramethyldenigrin B also showed inhibitory activity against biofilm formation of uropathogenic E. coli. Together, these findings provide new insights for the rational design of novel biofilm and QS inhibitors.

A novel inductively coupled capacitor wireless sensor system for rapid antibiotic susceptibility testing.

BACKGROUND: The increasing prevalence and severity of antimicrobial resistance (AMR) present a major challenge to our healthcare system. Rapid detection of AMR is essential for lifesaving under emergent conditions such as sepsis. The current gold standard phenotypic antibiotic susceptibility testing (AST) takes more than a day to obtain results. Genotypic ASTs are faster (hours) in detecting the presence of resistance genes but require specific probes/knowledge of each AMR gene and do not provide specific information at the phenotype level. To address this unmet challenge, we developed a new rapid phenotypic AST. RESULT: We designed a new electrochemical biosensor based on the concept of magnetically coupled LC sensors. The engineered LC sensors can be placed in 96-well plates and communicate the reading remotely with a receiver coil for signal analysis. The sensors were validated by monitoring the growth of Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa in the presence and absence of different antibiotics. Drug-resistant strains were used as controls. Bacterial growth was detected within 30 min after inoculation, allowing rapid determination of antibiotic susceptibility at the phenotype level. The sensor also functions in the presence of host proteins when tested with 2% FBS in growth media. CONCLUSIONS: With the compatibility with 96-well plates, this label-free rapid 30-min AST has the potential for low-cost applications with simple integration into the existing workflow in clinical settings.

Mimicking Kidney Flow Shear Efficiently Induces Aggregation of LECT2, a Protein Involved in Renal Amyloidosis.

Aggregation of leukocyte cell-derived chemotaxin 2 (LECT2) causes ALECT2, a systemic amyloidosis that affects the kidney and liver. Homozygosity of the I40V LECT2 mutation is believed to be necessary but not sufficient for the disease. Previous studies established that LECT2 fibrillogenesis is greatly accelerated by loss of its single bound zinc ion and stirring or shaking. These forms of agitation are often used to facilitate protein aggregation, but they create heterogeneous shear conditions, including air-liquid interfaces that denature proteins, that are not present in the body. Here, we determined the extent to which a more physiological form of mechanical stress-shear generated by fluid flow through a network of artery and capillary-sized channels-drives LECT2 fibrillogenesis. To mimic blood flow through the human kidney, where LECT2 and other proteins form amyloid deposits, we developed a microfluidic device consisting of progressively branched channels narrowing from 5 mm to 20 µm in width. Flow shear was particularly pronounced at the branch points and in the smallest capillaries, and this induced LECT2 aggregation much more efficiently than conventional shaking methods. EM images suggested the resulting fibril structures were different in the two conditions. Importantly, results from the microfluidic device showed the first evidence that the I40V mutation accelerated fibril formation and increased both size and density of the aggregates. These findings suggest that kidney-like flow shear, in combination with zinc loss, acts in combination with the I40V mutation to trigger LECT2 amyloidogenesis. These microfluidic devices may be of general use for uncovering the mechanisms by which blood flow induces misfolding and amyloidosis of circulating proteins.

Prognostic value of programmed cell death ligand 1 expression in patients with intrahepatic cholangiocarcinoma: a meta-analysis.

Background: Programmed cell death ligand 1 (PD-L1) is highly expressed in intrahepatic cholangiocarcinoma (ICC) tissues. But there is still a dispute over the prognostic value of PD-L1 in patients with ICC. This study aimed to evaluate the prognostic value of PD-L1 expression in patients with ICC. Methods: We performed a meta-analysis based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses Guidelines. We searched the literature from PubMed, Embase, Web of Science, and the Cochrane Library up to December 5, 2022. Hazard ratios (HR) and their 95% confidence intervals (95% CI) were calculated to analyze the overall survival (OS), recurrence-free survival (RFS), and time to relapse. The quality of the studies was assessed using the Newcastle-Ottawa scale. Publication bias was assessed using a funnel plot and Egger's test. Results: Ten trials with 1944 cases were included in this meta-analysis. The results showed that the low-PD-L1 group had a statistically significant advantage in OS (HR, 1.57; 95% CI, 1.38-1.79, P <0.00001), RFS (HR, 1.62; 95% CI, 1.34-1.97, P <0.00001), and time to relapse (HR, 1.60; 95% CI, 1.25-2.05, P = 0.0002) compared with the high-PD-L1 group. High programmed cell death (PD1)levels, on the other hand, were correlated with poorer OS (HR, 1.96; 95% CI, 1.43-2.70; P <0.0001) and RFS (HR, 1.87; 95% CI, 1.21-2.91; P = 0.005). Multivariate analysis showed that PD-L1 could act as an independent predictor for OS (HR, 1.48; 95% CI, 1.14-1.91; P = 0.003) and RFS (HR, 1.74; 95% CI, 1.22-2.47; P = 0.002), and PD1 acted as an independent predictor for OS (HR, 1.66; 95% CI, 1.15-2.38; P = 0.006). Conclusion: This meta-analysis demonstrated that high PD-L1/PD1 expression is associated with poor survival in ICC. PD-L1/PD1 may be a valuable prognostic and predictive biomarker and potential therapeutic target in ICC. Systematic review registration: https://www.crd.york.ac.uk/PROSPERO/, identifier CRD42022380093.

Tailored Fabrication of Plasmonic Film Light Filters for Enhanced Microalgal Growth and Biomass Composition.

Through plasmon resonance, silver and gold nanoparticles can selectively backscatter light within different regions of the visible electromagnetic spectrum. We engineered a plasmonic film technology that utilizes gold and silver nanoparticles to enhance light at the necessary wavelengths for microalgal photosynthetic activities. Nanoparticles were embedded in a polymeric matrix to fabricate millimeter-thin plasmonic films that can be used as light filters in microalgal photobioreactors. Experiments conducted with microalga Chlamydomonas reinhardtii proved that microalgal growth and photosynthetic pigment production can be increased by up to 50% and 78%, respectively, by using these plasmonic film light filters. This work provides a scalable strategy for the efficient production of specialty chemicals and biofuels from microalgae through irradiation control with plasmonic nanoparticles.

High-Throughput Biofilm Assay to Investigate Bacterial Interactions with Surface Topographies.

The specific topography of biomaterials plays an important role in their biological interactions with cells and thus the safety of medical implants. Antifouling materials can be engineered with topographic features to repel microbes. Meanwhile, undesired topographies of implants can cause complications such as breast implant-associated anaplastic large cell lymphoma (BIA-ALCL). While the cause of BIA-ALCL is not well understood, it is speculated that textured surfaces are prone to bacterial biofilm formation as a contributing factor. To guide the design of safer biomaterials and implants, quantitative screening approaches are needed to assess bacterial adhesion to different topographic surface features. Here we report the development of a high-throughput microplate biofilm assay for such screening. The assay was used to test a library of polydimethylsiloxane (PDMS) textures composed of varying sizes of recessive features and distances between features including those in the range of breast implant textures. Outliers of patterns prone to bacterial adhesion were further studied using real-time confocal fluorescence microscopy. The results from these analyses revealed that surface area itself is a poor predictor for adhesion, while the size and spacing of topographic features play an important role. This high-throughput biofilm assay can be applied to studying bacteria-material interactions and rational development of materials that inhibit bacterial colonization.

Cadiolide analogues and their precursors as new inhibitors of bacterial quorum sensing and biofilm formation.

Bacterial quorum sensing (QS) and biofilm formation are promising targets for developing new therapies to treat chronic infections. Herein, we report the stereoselective synthesis of 18 new analogs of natural cadiolides. Among the new compounds, substances 8b, 8f, 8i, 9a, 9b and 9e completely inhibited the biofilm formation of Escherichia coli RP347 in vitro. In addition, compound 8b interfered acyl-homoserine lactone (AHL) mediated QS, while 9e interrupted the QS via autoinducer-2 (AI-2). Biological assays also revealed that synthetic intermediates alkynones are potent inhibitors of AI-2 and AHL-mediated QS. These results indicate that cadiolides and alkynones are good candidates for further structural modification for a new generation of more potent antimicrobial agents.

Persister control by leveraging dormancy associated reduction of antibiotic efflux.

Persistent bacterial infections do not respond to current antibiotic treatments and thus present a great medical challenge. These conditions have been linked to the formation of dormant subpopulations of bacteria, known as persister cells, that are growth-arrested and highly tolerant to conventional antibiotics. Here, we report a new strategy of persister control and demonstrate that minocycline, an amphiphilic antibiotic that does not require active transport to penetrate bacterial membranes, is effective in killing Escherichia coli persister cells [by 70.8 ± 5.9% (0.53 log) at 100 µg/mL], while being ineffective in killing normal cells. Further mechanistic studies revealed that persister cells have reduced drug efflux and accumulate more minocycline than normal cells, leading to effective killing of this dormant subpopulation upon wake-up. Consistently, eravacycline, which also targets the ribosome but has a stronger binding affinity than minocycline, kills persister cells by 3 logs when treated at 100 µg/mL. In summary, the findings of this study reveal that while dormancy is a well-known cause of antibiotic tolerance, it also provides an Achilles' heel for controlling persister cells by leveraging dormancy associated reduction of drug efflux.

Cytotoxic effect of galvanically coupled magnesium-titanium particles on Escherichia coli.

Orthopedic device-related infections (ODRIs) are difficult to control due to microbial biofilm formation and associated with high-level resistance to conventional antibiotics. In many cases, the only treatment option for ODRI is explantation. Previous studies have shown that application of cathodic potentials at the metal surface can eradicate biofilms, and Mg and Mg-Ti particles have the same effect as cathodic potentials. This study investigated the effects of Mg and Mg-Ti particles on established biofilms and planktonic cells E. coli. Bacterial cultures with developed biofilms or planktonic cells were treated with Mg or Mg-Ti particles, and the viability were assessed using flow cytometry or visual assessment methods (i.e., observation from SEM images and opacity of the solution). It was found that viability of biofilms treated with 16.67 mg/ml of Mg was 2.8 ± 0.96% at the end of 6-hr killing compared to untreated controls. This extent of killing was more significant compared to 24-hr grown biofilms treated with ofloxacin, an antibiotic known to be effective against these bacteria. Biofilms treated with 50 and 100 µg/ml of ofloxacin had 62 ± 4.6% and 52 ± 19.3% survival, respectively, where ofloxacin at these concentrations is known to kill planktonic counterparts very effectively. Inhibition zone tests revealed that biofilms within 2 mm of Mg or Mg-Ti particle clusters were effectively killed. These results demonstrated the potential of Mg or Mg-Ti particles in killing microbial biofilms and potential for controlling ODRI.

Biofilm Removal by Reversible Shape Recovery of the Substrate.

Bacteria can colonize essentially any surface and form antibiotic resistant biofilms, which are multicellular structures embedded in an extracellular matrix secreted by the attached cells. To develop better biofilm control technologies, we recently demonstrated that mature biofilms can be effectively removed through on-demand shape recovery of a shape memory polymer (SMP) composed of tert-butyl acrylate (tBA). It was further demonstrated that such a dynamic substratum can sensitize the detached biofilm cells to antibiotics. However, this SMP can undergo shape change only once, limiting its application in long-term biofilm control. This motivated the present study, which aimed to prove the concept that biofilm can be effectively removed by repeated on-demand shape recovery. Reversible shape memory polymers (rSMPs) containing poly(ε-caprolactone) diisocyanatoethyl dimethacrylate (PCLDIMA) of varying molecular masses and butyl acrylate (BA) as a linker were synthesized by using benzoyl peroxide (BPO) as a thermal initiator. By comparison of several combinations of PCLDIMA of different molecular masses, a 2:1 weight ratio mixture of 2000 and 15000 g/mol PCLDIMA was the most promising because it had a shape transition (at 36.7 °C) close to body temperature. The synthesized rSMP demonstrated good reversible shape recovery and up to 94.3 ± 1.0% removal of 48 h Pseudomonas aeruginosa PAO1 biofilm cells after three consecutive shape recovery cycles. Additionally, the detached biofilm cells were found to be 5.0 ± 1.2 times more susceptible to 50 µg/mL tobramycin than the static control.

Development of the computational antibiotic screening platform (CLASP) to aid in the discovery of new antibiotics.

Bacterial colonization of biotic and abiotic surfaces and antibiotic resistance are grand challenges with paramount societal impacts. However, in the face of increasing bacterial resistance to all known antibiotics, efforts to discover new classes of antibiotics have languished, creating an urgent need to accelerate the antibiotic discovery pipeline. A major deterrent in the discovering of new antibiotics is the limited permeability of molecules across the bacterial envelope. Notably, the Gram-negative bacteria have nutrient specific protein channels (or porins) that restrict the permeability of non-essential molecules, including antibiotics. Here, we have developed the Computational Antibiotic Screening Platform (CLASP) for screening of potential drug molecules through the porins. The CLASP takes advantage of coarse grain (CG) resolution, advanced sampling techniques, and a parallel computing environment to maximize its performance. The CLASP yields comprehensive thermodynamic and kinetic output data of a potential drug molecule within a few hours of wall-clock time. Its output includes the potential of mean force profile, energy barrier, the rate constant, and contact analysis of the molecule with the pore-lining residues, and the orientational analysis of the molecule in the porin channel. In our first CLASP application, we report the transport properties of six carbapenem antibiotics-biapenem, doripenem, ertapenem, imipenem, meropenem, and panipenem-through OccD3, a major channel for carbapenem uptake in Pseudomonas aeruginosa. The CLASP is designed to screen small molecule libraries with a fast turnaround time to yield structure-property relationships to discover antibiotics with high permeability. The CLASP will be freely distributed to enable accelerated antibiotic drug discovery.

How microbes read the map: Effects of implant topography on bacterial adhesion and biofilm formation.

Microbes have remarkable capabilities to attach to the surface of implanted medical devices and form biofilms that adversely impact device function and increase the risk of multidrug-resistant infections. The physicochemical properties of biomaterials have long been known to play an important role in biofilm formation. More recently, a series of discoveries in the natural world have stimulated great interest in the use of 3D surface topography to engineer antifouling materials that resist bacterial colonization. There is also increasing evidence that some medical device surface topographies, such as those designed for tissue integration, may unintentionally promote microbial attachment. Despite a number of reviews on surface topography and biofilm control, there is a missing link between how bacteria sense and respond to 3D surface topographies and the rational design of antifouling materials. Motivated by this gap, we present a review of how bacteria interact with surface topographies, and what can be learned from current laboratory studies of microbial adhesion and biofilm formation on specific topographic features and medical devices. We also address specific biocompatibility considerations and discuss how to improve the assessment of the anti-biofilm performance of topographic surfaces. We conclude that 3D surface topography, whether intended or unintended, is an important consideration in the rational design of safe medical devices. Future research on next-generation smart antifouling materials could benefit from a greater focus on translation to real-world applications.

High-Level Antibiotic Tolerance of a Clinically Isolated Enterococcus faecalis Strain.

Bacteria can survive antibiotic treatment both by acquiring antibiotic resistance genes and through mechanisms of tolerance that are based on phenotypic changes and the formation of metabolically inactive cells. Here, we report an Enterococcus faecalis strain (E. faecalis UM001B) that was isolated from a cystic fibrosis patient and had no increase in resistance but extremely high-level tolerance to ampicillin, vancomycin, and tetracycline. Specifically, the percentages of cells that survived 3.5-h antibiotic treatment (at 100 µg · ml-1) were 25.4% ± 4.3% and 51.9% ± 4.0% for ampicillin and tetracycline, respectively; vancomycin did not exhibit any significant killing. Consistent with the changes in antibiotic susceptibility, UM001B was found to have reduced penetration of ampicillin and vancomycin and accumulation of tetracycline compared to the reference strain ATCC 29212. Based on whole-genome sequencing, four amino acid substitutions were identified in one of the tetracycline efflux pump repressors (TetRs), compared to ATCC 29212. Results of molecular simulations and experimental assays revealed that these mutations could lead to higher levels of tetracycline efflux activity. Consistently, replicating these mutations in Escherichia coli MG1655 increased its tolerance to tetracycline. Overall, these findings provide new insights into the development of multidrug tolerance in E. faecalis, which can facilitate future studies to better control enterococcal infections.IMPORTANCEEnterococcus faecalis represents a major group of pathogens causing nosocomial infections that are resistant to multiple classes of antibiotics. An important challenge associated with E. faecalis infection is the emergence of multidrug-tolerant strains, which have normal MICs but do not respond to antibiotic treatment. Here, we report a strain of E. faecalis that was isolated from a cystic fibrosis patient and demonstrated high-level tolerance to ampicillin, vancomycin, and tetracycline. Whole-genome sequencing revealed critical substitutions in one of the tetracycline efflux pump repressors that are consistent with the increased tolerance of E. faecalis UM001B to tetracycline. These findings provide new information about bacterial antibiotic tolerance and may help develop more effective therapeutics.

Magnetically driven active topography for long-term biofilm control.

Microbial biofilm formation on indwelling medical devices causes persistent infections that cannot be cured with conventional antibiotics. To address this unmet challenge, we engineer tunable active surface topographies with micron-sized pillars that can beat at a programmable frequency and force level in an electromagnetic field. Compared to the flat and static controls, active topographies with the optimized design prevent biofilm formation and remove established biofilms of uropathogenic Escherichia coli (UPEC), Pseudomonas aeruginosa, and Staphylococcus aureus, with up to 3.7 logs of biomass reduction. In addition, the detached biofilm cells are found sensitized to bactericidal antibiotics to the level comparable to exponential-phase planktonic cells. Based on these findings, a prototype catheter is engineered and found to remain clean for at least 30 days under the flow of artificial urine medium, while the control catheters are blocked by UPEC biofilms within 5 days.

Noninvasive Control of Bacterial Biofilms by Wireless Electrostimulation.

Bacteria are well-known to form biofilms on biomaterials and implanted medical devices and cause serious infections that are incurable by conventional antibiotics. Consequently, such infections can lead to explantation and, in severe cases, amputation or even death. To address this unmet challenge, we developed a new method for noninvasive treatment of device-associated biofilm infections. We demonstrate that antibiotic tolerant biofilm cells of Pseudomonas aeruginosa and Staphylococcus aureus can be effectively killed by electromagnetically induced direct current generated wirelessly using a remote power source, which was further enhanced through synergy with conventional antibiotics. Electrochemical analyses attributed the cidal effects to DC-generated reactive oxygen species. The treatment conditions were found safe to the epithelial and fibroblast cell lines. On the basis of these findings, a prototype device was engineered and demonstrated for effective killing of biofilm cells using both ex vivo and in vivo models. With the capability to kill bacteria without using a directly connected power source, this platform technology has possible applications in noninvasive treatment of biofilm infections associated with cochlear, orthopedic, and other implanted medical devices.

Sensing the unreachable: challenges and opportunities in biofilm detection.

Bacteria can attach to essentially all materials and form multicellular biofilms with high-level tolerance to antimicrobials. Detrimental biofilms are responsible for a variety of problems ranging from food and water contamination, bio-corrosion, to drug resistant infections. Besides the challenges in control, biofilms are also difficult to detect due to the lack of biofilm-specific biomarkers and methods for non-destructive imaging. In this article, we present a concise review of recent advancements in this field, with a focus on medical device-associated infections. We also discuss the technologies that have potential for non-destructive detection of bacterial biofilms.

Antibiotic Susceptibility of Escherichia coli Cells during Early-Stage Biofilm Formation.

Bacteria form complex multicellular structures on solid surfaces known as biofilms, which allow them to survive in harsh environments. A hallmark characteristic of mature biofilms is the high-level antibiotic tolerance (up to 1,000 times) compared with that of planktonic cells. Here, we report our new findings that biofilm cells are not always more tolerant to antibiotics than planktonic cells in the same culture. Specifically, Escherichia coli RP437 exhibited a dynamic change in antibiotic susceptibility during its early-stage biofilm formation. This phenomenon was not strain specific. Upon initial attachment, surface-associated cells became more sensitive to antibiotics than planktonic cells. By controlling the cell adhesion and cluster size using patterned E. coli biofilms, cells involved in the interaction between cell clusters during microcolony formation were found to be more susceptible to ampicillin than cells within clusters, suggesting a role of cell-cell interactions in biofilm-associated antibiotic tolerance. After this stage, biofilm cells became less susceptible to ampicillin and ofloxacin than planktonic cells. However, when the cells were detached by sonication, both antibiotics were more effective in killing the detached biofilm cells than the planktonic cells. Collectively, these results indicate that biofilm formation involves active cellular activities in adaption to the attached life form and interactions between cell clusters to build the complex structure of a biofilm, which can render these cells more susceptible to antibiotics. These findings shed new light on bacterial antibiotic susceptibility during biofilm formation and can guide the design of better antifouling surfaces, e.g., those with micron-scale topographic structures to interrupt cell-cell interactions.IMPORTANCE Mature biofilms are known for their high-level tolerance to antibiotics; however, antibiotic susceptibility of sessile cells during early-stage biofilm formation is not well understood. In this study, we aim to fill this knowledge gap by following bacterial antibiotic susceptibility during early-stage biofilm formation. We found that the attached cells have a dynamic change in antibiotic susceptibility, and during certain phases, they can be more sensitive to antibiotics than planktonic counterparts in the same culture. Using surface chemistry-controlled patterned biofilm formation, cell-surface and cell-cell interactions were found to affect the antibiotic susceptibility of attached cells. Collectively, these findings provide new insights into biofilm physiology and reveal how adaptation to the attached life form may influence antibiotic susceptibility of bacterial cells.

Bacterial Metabolism During Biofilm Growth Investigated by 13C Tracing.

This study investigated the metabolism of Pseudomonas aeruginosa PAO1 during its biofilm development via microscopy imaging, gene expression analysis, and 13C-labeling. First, dynamic labeling was employed to investigate glucose utilization rate in fresh biofilms (thickness 40∼60 micrometer). The labeling turnover time of glucose-6-P indicated biofilm metabolism was substantially slower than planktonic cells. Second, PAO1 was cultured in continuous tubular biofilm reactors or shake flasks. Then 13C-metabolic flux analysis of PAO1 was performed based on the isotopomer patterns of proteinogenic amino acids. The results showed that PAO1 biofilm cells during growth conserved the flux features as their planktonic mode. (1) Glucose could be degraded by two cyclic routes (the TCA cycle and the Entner-Doudoroff-Embden-Meyerhof-Parnas loop) that facilitated NAD(P)H supplies. (2) Anaplerotic pathways (including pyruvate shunt) increased flux plasticity. (3) Biofilm growth phenotype did not require significant intracellular flux rewiring (variations between biofilm and planktonic flux network, normalized by glucose uptake rate as 100%, were less than 20%). (4) Transcription analysis indicated that key catabolic genes in fresh biofilm cells had expression levels comparable to planktonic cells. Finally, PAO1, Shewanella oneidensis (as the comparing group), and their c-di-GMP transconjugants (with different biofilm formation capabilities) were 13C-labeled under biofilm reactors or planktonic conditions. Analysis of amino acid labeling variances from different cultures indicated Shewanella flux network was more flexibly changed than PAO1 during its biofilm formation.